WIC Valve

1.25″ Pneumatic Air Actuated Stainless Ball Valve Single Acting Spring Return

/

1.25″ Inch Pneumatic Stainless Steel Industrial Air Actuated Ball Valve Normally Closed Single Acting (Spring Return) WIC Valve PVS series 1-1/4″ Inch NPT pneumatic air actuated valve ball valve comes with a stainless steel 3-piece ball valve body, it provides a easy installation and maintenance through the slide out body method. This industrial air actuated valve is used to control the on and off of the valve for media such as air, gas, liquid, water and steam. PVS series single acting air actuated ball valve use air pressure to open the valve and springs to close the valve. The characteristic of the air actuated ball valve is that it has a higher flow rate, higher temperature resistant and higher pressure compare with the direct acting valve. Air actuated ball valve is ideal for the hazardous environments. PVS Series Air Actuator Ball Valve Specifications: Model Number: PVS-1 1/4-T Valve Type: 2 Way Normally Closed Service Media: Air, Gas, Liquid, Water, Steam Operation Model: Air Actuated Single Acting (Spring Return) Actuator Operating Pressure: 100 PSI Standard Body Material: 316 Stainless Steel / CF8M Seal Material: PTFE Operating Pressure: 0 to 1000 PSI at 100 °F Media Temperature: -51 to 230 °C (-60 to 450 °F) Ambient Temperature: -20 to 80 °C (-4 to 176 °F) Port Size: 1-1/4″ NPT Female Port Standard Pneumatic Air Actuator Specifications: Pneumatic Actuator Specifications Actuator Standard ISO 5211, NAMUR, DIN 3337 Operating Pressure Range Min: 45 PSI – Max:120 PSI Operating Media Pressurized Filter Air Operating Temperature –20 to 80°C 3 Pieces Stainless Ball Valve Specification: Operating Pressure: 3/8″ to 2″ : 1000 PSI @ 100°F WOG Operating Temperature: -60 to 450°F Port Style: Full Port Port Connection: FNPT Mounting Standard: ISO 5211, DIN 3203-M3 Ball Valve Parts and Materials Part Name Material Quantity Ball SS 316 1 Body Connector SS 316 / CF8M 1 Body Connector Bolt SS 304 4 Body Connector Nut SS 304 4 Body Connector Washer SS 304 4 CAP SS 316 1 Gland Nut SS 304 1 Joint Gasket PTFE 1 Seat PTFE 2 Stem SS 316 1 Stem Nut SS 304 1 Stem Packing PTFE 1 Stem Washer SS 304 1 Thrust Washer PTFE 1 WIC Valve Pneumatic Air Actuator Internal Structure:1. Indicator: Position indicator with NAMUR mounting standard.2. Pinion: High precision piston is made by nickelled alloy steel. Fully conform with ISO5211, DIN3337 and Namur.3. Actuator Body: Extruded aluminum alloy ASTM6005 body.4. O-Rings: High quality NBR (Buna-N)5. Pistons: Die-casting aluminum twin rack pistons are treated with hard anodized. Symmetric mounting position that ensure a fast operation and long cycle life.6. Travel Adjustment bolts: Two independent external travel adjustment bolts allow ±5° adjustment for both open and close directions.7. End Caps: Die-casting aluminum powder polyester.8. High Performance Springs: Preloaded coating springs are made by high quality material for corrosion resistant.9. Bearing & Guides: Made by low friction compound material to minimize the direct contact between metals. PVS Series Air Actuator Component Drawing:No. NameQtyMaterial 1Indicator Screw1Plastic2Indicator1Plastic3Spring Clip1Stainless Steel4Washer1Stainless Steel5Outside Washer1PTFE6Body1Extruded Aluminum Alloy7Inside Washer1PTFE8Cam 1Alloy Steel9O-ring (Pinion Top)1NBR10Bearing (Pinion Top)1Engineering Plastics11Pinion 1Alloy Steel12O-ring (Pinion Bottom)1Engineering Plastics13Bearing (Pinion Bottom)1NBR14Plug2NBR15O-ring (Adjust Screw)2NBR16Washer (Adjust Screw) 2Stainless Steel17Nut (Adjust Screw)2Stainless Steel18Adjust Screw 2Stainless Steel19Piston2Cast Aluminum20Guide (Piston)2Engineering Plastics21Bearing (Piston)2Engineering Plastics22O-ring (Piston)2NBR23Spring-Integrated 0~12Spring Steel 24O-ring (End Cap) 2NBR25End Cap 2Cast Aluminum26Cap Screw 8Stainless Steel27Stop Screw 2Stainless Steel28Nut ( Stop Screw) 2Stainless Steel PVS Series Air Actuator Operating Principle:Pressurized air is introduced to Port A that forces the pistons outward. It causes the springs to compress and the piston turns counterclockwise which opens the valve. Meanwhile air is being exhausted from port B (See Drawing 1)When the pressurized air is not applied to Port A, the air pressure loss. The compressed springs extend and forces the pistons inward. As the springs extend, it rotate the actuator and the pinion turns clockwise which closes the valve. (See Drawing 2) Pneumatic Air Actuator Dimension & Mounting Connection: Shipping Information: Shipping on this item is FREE within the United States. We ship to Alaska, Hawaii, Puerto Rico, Guam, Virgin Islands, APO/FPO. For domestic fitting orders, we ship via US Postal Service First Class Mail (transit time for delivery 2 – 5 business days), unless other shipping method is requested. For international orders, we ship via US Postal Service First Class Mail. (transit time for delivery 5 – 14 business days), unless other shipping method is requested. International customers are responsible for all customs duties, taxes and tariffs. Order Tracking Info: Most orders are shipped within 1-2 business days. Delivery confirmation number will be emailed to you once your package has been shipped. Sales Tax: California residents pay 8.75% sales tax. Customers from other states or countries do not pay sales tax. Return Policy: We want you to be completely satisfied with your purchase. In the event you are unsatisfied, you may return the item providing it is in the same condition as received within 30 days of your invoice date. All damaged and / or defective items must be reported within 5 days of receipt. All returns shipments must be prepaid by sender. Shipping and handling is not refundable. A restocking fee of 20% may be applied to returned merchandise. Returns are not accepted without a prior return authorization number. Contact Us: Should you have any questions, please feel free to contact us by sending an email to our friendly customer service team. We are more than happy to assist you.

Pneumatic Air Flow Speed Control Valve Tube OD 1/4″ Inch Push In Fitting 1 Piece

/

Pneumatic Inline Air Flow Speed Control Valve Tube OD 1/4″ Inch One Touch Push In To Connect Fitting (One Piece) PFV Series pneumatic inline air flow speed control valve push in fitting equipped with a convenient one touch release button that provides a easy and quick tubing connections with no special tools required. Our unique stainless collect design offers a secure connections that hold the tube firmly without restricting flow. Yet the special adjustment needle design provides a high precision air flow adjustment. PFV Series Pneumatic Air Flow Control Valve Specifications Model Number: PFV-T1/4 Operating Pressure: 0 – 150 PSI 0 – 990 kpa Vacuum: 0 – 29.5 in Hg 750 mm Hg Operating Temperature: 0 – 60 °C 32 to 140F Application: Air Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene. Air Flow Control Valve Material of Construction: Plastic Body: PBT (Polybutylene terephthalate) Release Button: POM (Poly oxy methylene copolymer) Grip Ring: Stainless Steel O-Ring: NBR (Buna-N) PFV Series Schematic of Air Flow Speed Control Valve Construction: Tubing Size Tolerance Requirements: Polyurethane Tubing: specified fitting size ± 0.004” max. (± 0.1 mm max.) Polyethylene Tubing: specified fitting size ± 0.006” max. (± 0.15 mm max.) Polypropylene Tubing: specified fitting size ± 0.004” max. (± 0.1 mm max.) Nylon Tubing: specified fitting size ± 0.004” max. (± 0.1 mm max.) Shipping Information: Shipping on this item is FREE within the United States. We ship to Alaska, Hawaii, Puerto Rico, Guam, Virgin Islands, APO/FPO. For domestic fitting orders, we ship via US Postal Service First Class Mail (transit time for delivery 2 – 5 business days), unless other shipping method is requested. For international orders, we ship via US Postal Service First Class Mail. (transit time for delivery 5 – 14 business days), unless other shipping method is requested. International customers are responsible for all customs duties, taxes and tariffs. Order Tracking Info: Most orders are shipped within 1-2 business days. Delivery confirmation number will be emailed to you once your package has been shipped. Sales Tax: California residents pay 8.75% sales tax. Customers from other states or countries do not pay sales tax. Return Policy: We want you to be completely satisfied with your purchase. In the event you are unsatisfied, you may return the item providing it is in the same condition as received within 30 days of your invoice date. All damaged and / or defective items must be reported within 5 days of receipt. All returns shipments must be prepaid by sender. Shipping and handling is not refundable. A restocking fee of 20% may be applied to returned merchandise. Returns are not accepted without a prior return authorization number. Contact Us: Should you have any questions, please feel free to contact us by sending an email to our friendly customer service team. We are more than happy to assist you.

1″ Inch Pneumatic Air Actuated Stainless Ball Valve Double Acting Air Return

/

1″ Inch Pneumatic Stainless Steel Industrial Air Actuated Ball Valve Double Acting (Air Return)PVD series 1″ NPT pneumatic air actuated valve equipped with a stainless steel 3-piece ball valve, it allows a easy installation. PVD series double acting air actuated valve use pressurized air to open and close the ball valve. The characteristic of the air actuated ball valve is that it has high flow rate, the full port straight through ball valve allows the service media such as air, gas, liquid, steam and water flow through directly without reducing the flow speed. The 316 stainless steel ball valve comes with Teflon seal which can be used at a high operating temperature and pressure applications. Also, it is ideal for the hazardous environments. PVD Series Pneumatic Air Actuator Stainless Steel Ball Valve Specifications: Model Number: PVD-1-T Valve Type: 2 Way Service Media: Air, Gas, Liquid, Water, Steam Operation Model: Air Actuated Double Acting (Air Return) Actuator Operating Pressure: 100 PSI Standard Body Material: 316 Stainless Steel / CF8M Seal Material: PTFE Operating Pressure: 0 to 1000 PSI at 100 °F Media Temperature: -51 to 230 °C (-60 to 450 °F) Ambient Temperature: -20 to 80 °C (-4 to 176 °F) Port Size: 1″ NPT Female Port Installation Hardware: 2 Pieces Tube OD 1/4″ X Thread 1/8″ Male Straight Connector Fitting Included Pneumatic Air Actuator Specifications: Pneumatic Actuator Specifications Actuator Standard ISO 5211, NAMUR, DIN 3337 Operating Pressure Range Min: 45 PSI – Max:120 PSI Operating Media Pressurized Filter Air Operating Temperature –20 to 80°C 3 Pieces Stainless Steel Ball Valve Specification: Operating Pressure: 3/8″ to 2″ : 1000 PSI @ 100°F WOG Operating Temperature: -60 to 450°F Port Style: Full Port Port Connection: FNPT Mounting Standard: ISO 5211, DIN 3203-M3 Ball Valve Parts and Materials Part Name Material Quantity Ball SS 316 1 Body Connector SS 316 / CF8M 1 Body Connector Bolt SS 304 4 Body Connector Nut SS 304 4 Body Connector Washer SS 304 4 CAP SS 316 1 Gland Nut SS 304 1 Joint Gasket PTFE 1 Seat PTFE 2 Stem SS 316 1 Stem Nut SS 304 1 Stem Packing PTFE 1 Stem Washer SS 304 1 Thrust Washer PTFE 1 WIC Valve PVD Series Pneumatic Air Actuator Internal Structure: 1. Indicator: Position indicator with NAMUR mounting standard. 2. Pinion: High precision piston is made by nickelled alloy steel. Fully conform with ISO5211, DIN3337 and Namur. 3. Actuator Body: Extruded aluminum alloy ASTM6005 body. 4. O-Rings: High quality NBR (Buna-N) 5. Pistons: Die-casting aluminum twin rack pistons are treated with hard anodized. Symmetric mounting position that ensure a fast operation and long cycle life. 6. Travel Adjustment bolts: Two independent external travel adjustment bolts allow ±5° adjustment for both open and close directions. 7. End Caps: Die-casting aluminum powder polyester. 8. Bearing & Guides: Made by low friction compound material to minimize the direct contact between metals. PVD Series Air Actuator Operating Principle: Pressurized air is introduced to Port A that forces the pistons outward. It causes the pinion to turn counterclockwise while the air is being exhausted from Port B (See Drawing 1) Pressurized air is introduced to Port B that forces the pistons inward. It causes the pinion to turn clockwise while the air is being exhausted from Port A (See Drawing 2) PVD Series Pneumatic Air Actuator Dimension & Mounting Connection (Unit=mm): Shipping Information: Shipping on this item is FREE within the United States. We ship to Alaska, Hawaii, Puerto Rico, Guam, Virgin Islands, APO/FPO. For domestic fitting orders, we ship via US Postal Service First Class Mail (transit time for delivery 2 – 5 business days), unless other shipping method is requested. For international orders, we ship via US Postal Service First Class Mail. (transit time for delivery 5 – 14 business days), unless other shipping method is requested. International customers are responsible for all customs duties, taxes and tariffs. Order Tracking Info: Most orders are shipped within 1-2 business days. Delivery confirmation number will be emailed to you once your package has been shipped. Sales Tax: California residents pay 8.75% sales tax. Customers from other states or countries do not pay sales tax. Return Policy: We want you to be completely satisfied with your purchase. In the event you are unsatisfied, you may return the item providing it is in the same condition as received within 30 days of your invoice date. All damaged and / or defective items must be reported within 5 days of receipt. All returns shipments must be prepaid by sender. Shipping and handling is not refundable. A restocking fee of 20% may be applied to returned merchandise. Returns are not accepted without a prior return authorization number. Contact Us: Should you have any questions, please feel free to contact us by sending an email to our friendly customer service team. We are more than happy to assist you.

1″ Inch Pneumatic Air Actuated Stainless Ball Valve Double Acting Air Return

/

1″ Inch Pneumatic Stainless Steel Industrial Air Actuated Ball Valve Double Acting (Air Return)PVD series 1″ NPT pneumatic air actuated valve equipped with a stainless steel 3-piece ball valve, it allows a easy installation. PVD series double acting air actuated valve use pressurized air to open and close the ball valve. The characteristic of the air actuated ball valve is that it has high flow rate, the full port straight through ball valve allows the service media such as air, gas, liquid, steam and water flow through directly without reducing the flow speed. The 316 stainless steel ball valve comes with Teflon seal which can be used at a high operating temperature and pressure applications. Also, it is ideal for the hazardous environments. PVD Series Pneumatic Air Actuator Stainless Steel Ball Valve Specifications: Model Number: PVD-1-T Valve Type: 2 Way Service Media: Air, Gas, Liquid, Water, Steam Operation Model: Air Actuated Double Acting (Air Return) Actuator Operating Pressure: 100 PSI Standard Body Material: 316 Stainless Steel / CF8M Seal Material: PTFE Operating Pressure: 0 to 1000 PSI at 100 °F Media Temperature: -51 to 230 °C (-60 to 450 °F) Ambient Temperature: -20 to 80 °C (-4 to 176 °F) Port Size: 1″ NPT Female Port Installation Hardware: 2 Pieces Tube OD 1/4″ X Thread 1/8″ Male Straight Connector Fitting Included Pneumatic Air Actuator Specifications: Pneumatic Actuator Specifications Actuator Standard ISO 5211, NAMUR, DIN 3337 Operating Pressure Range Min: 45 PSI – Max:120 PSI Operating Media Pressurized Filter Air Operating Temperature –20 to 80°C 3 Pieces Stainless Steel Ball Valve Specification: Operating Pressure: 3/8″ to 2″ : 1000 PSI @ 100°F WOG Operating Temperature: -60 to 450°F Port Style: Full Port Port Connection: FNPT Mounting Standard: ISO 5211, DIN 3203-M3 Ball Valve Parts and Materials Part Name Material Quantity Ball SS 316 1 Body Connector SS 316 / CF8M 1 Body Connector Bolt SS 304 4 Body Connector Nut SS 304 4 Body Connector Washer SS 304 4 CAP SS 316 1 Gland Nut SS 304 1 Joint Gasket PTFE 1 Seat PTFE 2 Stem SS 316 1 Stem Nut SS 304 1 Stem Packing PTFE 1 Stem Washer SS 304 1 Thrust Washer PTFE 1 WIC Valve PVD Series Pneumatic Air Actuator Internal Structure: 1. Indicator: Position indicator with NAMUR mounting standard. 2. Pinion: High precision piston is made by nickelled alloy steel. Fully conform with ISO5211, DIN3337 and Namur. 3. Actuator Body: Extruded aluminum alloy ASTM6005 body. 4. O-Rings: High quality NBR (Buna-N) 5. Pistons: Die-casting aluminum twin rack pistons are treated with hard anodized. Symmetric mounting position that ensure a fast operation and long cycle life. 6. Travel Adjustment bolts: Two independent external travel adjustment bolts allow ±5° adjustment for both open and close directions. 7. End Caps: Die-casting aluminum powder polyester. 8. Bearing & Guides: Made by low friction compound material to minimize the direct contact between metals. PVD Series Air Actuator Operating Principle: Pressurized air is introduced to Port A that forces the pistons outward. It causes the pinion to turn counterclockwise while the air is being exhausted from Port B (See Drawing 1) Pressurized air is introduced to Port B that forces the pistons inward. It causes the pinion to turn clockwise while the air is being exhausted from Port A (See Drawing 2) PVD Series Pneumatic Air Actuator Dimension & Mounting Connection (Unit=mm): Shipping Information: Shipping on this item is FREE within the United States. We ship to Alaska, Hawaii, Puerto Rico, Guam, Virgin Islands, APO/FPO. For domestic fitting orders, we ship via US Postal Service First Class Mail (transit time for delivery 2 – 5 business days), unless other shipping method is requested. For international orders, we ship via US Postal Service First Class Mail. (transit time for delivery 5 – 14 business days), unless other shipping method is requested. International customers are responsible for all customs duties, taxes and tariffs. Order Tracking Info: Most orders are shipped within 1-2 business days. Delivery confirmation number will be emailed to you once your package has been shipped. Sales Tax: California residents pay 8.75% sales tax. Customers from other states or countries do not pay sales tax. Return Policy: We want you to be completely satisfied with your purchase. In the event you are unsatisfied, you may return the item providing it is in the same condition as received within 30 days of your invoice date. All damaged and / or defective items must be reported within 5 days of receipt. All returns shipments must be prepaid by sender. Shipping and handling is not refundable. A restocking fee of 20% may be applied to returned merchandise. Returns are not accepted without a prior return authorization number. Contact Us: Should you have any questions, please feel free to contact us by sending an email to our friendly customer service team. We are more than happy to assist you.

Scroll to Top